Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE #0 91d0e8e(freebsd10): Mon May  2 10:32:27 PDT 2016
    root@build.ixsystems.com:/tank/home/nightlies/build-freenas9/_BE/objs/tank/home/nightlies/build-freenas9/_BE/trueos/sys/FreeNAS.amd64 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 18253611008 (17408 MB)
avail memory = 16472829952 (15709 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
random: <Software, Yarrow> initialized
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150515/tbfadt-644)
ioapic0 <Version 2.0> irqs 0-86 on motherboard
kbd0 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 40000000 vs 40000001
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
pci0: <base peripheral, SD host controller> at device 17.0 (no driver attached)
pci0: <base peripheral, SD host controller> at device 18.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xd0a39000-0xd0a397ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <base peripheral, SD host controller> at device 23.0 (no driver attached)
pci0: <base peripheral, DMA controller> at device 24.0 (no driver attached)
pci0: <serial bus> at device 24.1 (no driver attached)
pci0: <serial bus> at device 24.2 (no driver attached)
pci0: <serial bus> at device 24.3 (no driver attached)
pci0: <serial bus> at device 24.4 (no driver attached)
pci0: <serial bus> at device 24.5 (no driver attached)
pci0: <serial bus> at device 24.6 (no driver attached)
pci0: <serial bus> at device 24.7 (no driver attached)
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci1: <Marvell 88SE9215 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xd0910000-0xd09107ff irq 16 at device 0.0 on pci1
ahci1: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ahci2: <Marvell 88SE9215 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xd0810000-0xd08107ff irq 17 at device 0.0 on pci2
ahci2: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS
ahcich6: <AHCI channel> at channel 0 on ahci2
ahcich7: <AHCI channel> at channel 1 on ahci2
ahcich8: <AHCI channel> at channel 2 on ahci2
ahcich9: <AHCI channel> at channel 3 on ahci2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xb000-0xb01f mem 0xd0700000-0xd077ffff,0xd0780000-0xd0783fff irq 18 at device 0.0 on pci3
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:08:9b:xx:xx:xx
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa000-0xa01f mem 0xd0600000-0xd067ffff,0xd0680000-0xd0683fff irq 19 at device 0.0 on pci4
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:08:9b:xx:xx:xx
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
pci0: <base peripheral, DMA controller> at device 30.0 (no driver attached)
pci0: <serial bus> at device 30.1 (no driver attached)
pci0: <serial bus> at device 30.2 (no driver attached)
pci0: <simple comms> at device 30.3 (no driver attached)
pci0: <simple comms> at device 30.4 (no driver attached)
pci0: <serial bus> at device 30.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ichwd0: <Intel Bay Trail SoC watchdog timer> on isa0
orm0: <ISA Option ROMs> at iomem 0xce000-0xd17ff,0xd1800-0xd4fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 76000000183b
device_attach: est0 attach returned 6
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 76000000183b
device_attach: est1 attach returned 6
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 76000000183b
device_attach: est2 attach returned 6
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 76000000183b
device_attach: est3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 7 ports with 7 removable, self powered
ugen0.2: <QNAP System, Inc.> at usbus0
uhub1: <QNAP System, Inc. ASM1074, class 9/0, rev 2.10/0.01, addr 1> on usbus0
uhub1: MTT enabled
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <Logitech> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus0
kbd1 at ukbd0
ugen0.4: <vendor 0x1005> at usbus0
umass0: <vendor 0x1005 USB DISK MODULE, class 0/0, rev 2.00/1.00, addr 3> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:11:0:-1: Attached to scbus11
ugen0.5: <QNAP System, Inc.> at usbus0
uhub2: <QNAP System, Inc. ASM1074, class 9/0, rev 3.00/0.01, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.6: <Kingston> at usbus0
umass1: <Kingston DataTraveler 3.0, class 0/0, rev 3.00/1.00, addr 5> on usbus0
umass1:  SCSI over Bulk-Only; quirks = 0x8100
umass1:12:1:-1: Attached to scbus12
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD60EFRX-68L0BN1 82.00A82> ACS-2 ATA SATA 3.x device
ada0: Serial Number WD-WXxxxxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 5723166MB (11721045168 512 byte sectors)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD60EFRX-68L0BN1 82.00A82> ACS-2 ATA SATA 3.x device
ada1: Serial Number WD-WXxxxxxxxxxx
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 5723166MB (11721045168 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD60EFRX-68L0BN1 82.00A82> ACS-2 ATA SATA 3.x device
ada2: Serial Number WD-WXxxxxxxxxxx
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 5723166MB (11721045168 512 byte sectors)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad8
ada3 at ahcich6 bus 0 scbus6 target 0 lun 0
ada3: <Samsung SSD 850 EVO 1TB EMT02B6Q> ACS-2 ATA SATA 3.x device
ada3: Serial Number xxxxxxxxxxxxxxx
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad16
da0 at umass-sim0 bus 0 scbus11 target 0 lun 0
da0: < USB DISK MODULE PMAP> Removable Direct Access SCSI device
da0: Serial Number 190054A2609B0B51
da0: 40.000MB/s transfers
da0: 492MB (1007616 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
da1 at umass-sim1 bus 1 scbus12 target 0 lun 0
da1: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device
da1: Serial Number 94DE8072478CEF5139B8223C
da1: 400.000MB/s transfers
da1: 15004MB (30728832 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 2000044728 Hz quality 1000
GEOM: ada1: the primary GPT table is corrupt or invalid.
GEOM: ada1: using the secondary instead -- recovery strongly advised.
GEOM: ada2: the primary GPT table is corrupt or invalid.
GEOM: ada2: using the secondary instead -- recovery strongly advised.
Trying to mount root from zfs:freenas-boot/ROOT/default []...
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
igb0: link state changed to UP
pmc: Unknown Intel CPU.
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
igb0: link state changed to DOWN
igb0: link state changed to UP
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus0
vboxdrv: fAsync=0 offMin=0x540 offMax=0x14b8
pid 1336 (syslog-ng), uid 0: exited on signal 6 (core dumped)
GEOM: da0: the primary GPT table is corrupt or invalid.
GEOM: da0: using the secondary instead -- recovery strongly advised.
GEOM: ada3: the primary GPT table is corrupt or invalid.
GEOM: ada3: using the secondary instead -- recovery strongly advised.
GEOM: ada2: the primary GPT table is corrupt or invalid.
GEOM: ada2: using the secondary instead -- recovery strongly advised.
GEOM: ada1: the primary GPT table is corrupt or invalid.
GEOM: ada1: using the secondary instead -- recovery strongly advised.
GEOM: ada0: the primary GPT table is corrupt or invalid.
GEOM: ada0: using the secondary instead -- recovery strongly advised.
GEOM: ada3: the primary GPT table is corrupt or invalid.
GEOM: ada3: using the secondary instead -- recovery strongly advised.
GEOM: da0: the primary GPT table is corrupt or invalid.
GEOM: da0: using the secondary instead -- recovery strongly advised.
GEOM_ELI: Device ada3p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
GEOM_ELI: Device ada3p1.eli destroyed.
GEOM_ELI: Detached ada3p1.eli on last close.
GEOM: ada0: the primary GPT table is corrupt or invalid.
GEOM: ada0: using the secondary instead -- recovery strongly advised.
GEOM: ada1: the primary GPT table is corrupt or invalid.
GEOM: ada1: using the secondary instead -- recovery strongly advised.
GEOM: ada2: the primary GPT table is corrupt or invalid.
GEOM: ada2: using the secondary instead -- recovery strongly advised.
GEOM_ELI: Device ada3p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
GEOM_ELI: Device ada0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
GEOM_ELI: Device ada2p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software